13×6 Plastic Shed Base Kit

Description

Shop the 13′ x 6′ Palmako Leif Heavy Duty Wooden Shed with bike shelter: Nordic spruce, secure storage, pent roof and flexible covered space.

A Timber Storage Hub with Space for Bikes, Logs and Garden Equipment

The 13′ x 6′ Palmako Leif Heavy Duty Wooden Shed with Bike Shelter, measuring approximately 3.8m x 1.9m, is a combined outdoor storage structure designed for households that need both enclosed security and open sheltered space. It brings together a 3m² security shed and an additional 2.9m² covered area, creating a practical arrangement for garden tools, bicycles, logs and other outdoor items.

This model is built as a heavy duty wooden shed rather than a lightweight storage unit. Its construction uses 16mm Nordic spruce tongue and groove cladding, readymade wall elements and a 32mm frame. The floor and roof are also formed from 16mm tongue and groove boards, which gives the structure consistency across the main elements. For buyers comparing garden buildings, these details are important because wall thickness, timber type, roof form and floor construction all influence day-to-day usability.

The building is supplied untreated, which means a suitable anti-fungal timber treatment is required after assembly and annually thereafter. This is not just a cosmetic step; it is part of the maintenance needed to protect the timber from rot and to support the warranty conditions. Paint may also be applied if the owner wishes to customise the appearance, provided the correct protective treatment is used.

Two Storage Zones in One Garden Building

A key feature of the Palmako Leif is its divided layout. Instead of offering one single enclosed room, it combines a lockable wooden shed with a separate sheltered bay. This can be useful in gardens where different types of items need different storage conditions.

The enclosed shed section provides around 3m² of secure internal space. It is suitable for items that should be kept behind doors, such as tools, gardening equipment, small machinery, outdoor accessories or seasonal items. The double doors provide wide access, making it easier to move bulkier objects in and out compared with a narrow single-door design.

The open sheltered area provides around 2.9m² of additional covered space. It can be positioned on either side of the shed, giving more flexibility during installation. This matters when the building needs to fit around fences, paths, planting areas or access routes. The sheltered section is well suited to bicycles and can also be used as a logstore, particularly because the slatted design allows ventilation around stored logs.

For many gardens, a separate bike store, logstore and tool shed would take up more space. This combined structure keeps those functions in one footprint while still separating items that need enclosed storage from those that mainly need overhead protection and airflow.

Nordic Spruce and Tongue & Groove Construction

The shed is made from Nordic spruce, a timber commonly used in garden buildings because it provides a good balance of strength, workability and appearance. In this model, the wall cladding is 16mm thick and uses tongue and groove construction. This means each board is shaped to interlock with the next, helping to create a tighter and more stable wall than simple overlap boards.

The 16mm tongue and groove cladding contributes to weather resistance by reducing gaps in the walls. This is important for a garden storage building, especially where tools, bikes and timber logs are being stored. A tighter wall construction helps to limit wind-driven rain entering the enclosed area, although regular timber treatment remains essential.

The use of readymade wall elements can also help with assembly. Rather than building every wall board individually on site, the shed is supplied with prepared elements and a fixings kit. This does not remove the need for careful installation, but it can make the process more structured when the instructions are followed properly.

The 32mm frame adds support to the overall structure. When considering a garden shed with bike shelter, the frame is especially relevant because the building must support not only an enclosed storage space but also the attached sheltered area. A substantial frame helps the structure remain practical for regular garden use.

A Floor Designed to Stay Clear of Ground Moisture

The floor is made from 16mm tongue and groove boards, matching the specification used for the roof. A solid timber floor is useful where the shed is intended to store tools, equipment and other items that should not sit directly on the ground.

The floor is supported by foundation joists. These raise the timber floor away from direct ground contact, improving airflow beneath the building. This is an important detail because ground moisture is one of the main causes of timber decay in garden buildings. By allowing air to circulate below the floor, the foundation joists help reduce the risk of moisture being trapped under the boards.

Even with foundation joists, the shed should be installed on a suitable level base. A level foundation helps the doors operate correctly and supports the structure evenly. If a base is uneven, the frame may twist over time, which can affect door alignment and general stability. Suitable preparation before assembly is therefore part of the long-term performance of the building.

For a structure of this size, it is also sensible to confirm the planned position before delivery. The 13′ x 6′ format provides a useful combination of storage zones, but the building still requires enough surrounding space for assembly, maintenance, door opening and access to the sheltered area.

The Modern Pent Roof and Covering Choices

The roof has a modern pent design. A pent roof slopes in one direction, giving the building a clean and contemporary profile. This roof type is often chosen for gardens where a simple, low-profile appearance is preferred. It can also make positioning against boundaries or near other garden features more straightforward, provided drainage direction and access are considered.

The roof itself is constructed from 16mm tongue and groove boards. However, it is important to note that the building does not include a roof covering as standard. A roof covering must therefore be selected separately if required, and this should be planned at the time of purchase rather than left until after assembly.

Two roof covering options are described for this shed: SBS and roof underlay felt. SBS is a thick, torch-on weatherproof felt with a very long lifespan. Because it is a torch-on product, installation should only be carried out by someone with advanced DIY skills or by a professional installer.

Roof underlay felt is simpler to nail onto the garden building and can be used as an underlay to SBS. It should only be used as a temporary roof covering if used alone. This distinction is important: while underlay felt can provide short-term coverage or work as part of a layered system, SBS is the more robust described option for long-term weather protection.

Choosing the right roof finish is part of protecting the shed. The timber roof boards provide the structural surface, but a suitable external covering is required to help shed rain and protect the timber below.

Lockable Doors and a Windowless Storage Room

The enclosed 3m² shed area has double doors fitted with a hasp and staple. This allows the owner to add a padlock, although the padlock is not included. The double-door layout supports easy access to the interior, especially for items with awkward shapes or wider dimensions.

The shed section is windowless. This is a practical feature for security because stored contents are not visible from outside. In gardens that are accessible from paths, neighbouring areas or shared spaces, a windowless design can reduce unwanted attention.

The combination of a solid timber structure, windowless walls and padlock-compatible door fitting makes the enclosed section suitable for items that require more protection than the open shelter can provide. It is still important to choose a good-quality padlock and to consider general garden security, but the shed’s layout provides a sensible basis for secure storage.

For buyers looking for a secure wooden garden shed, it is worth noting the exact supplied locking arrangement. The hasp and staple provides the fitting point, while the padlock is chosen separately. This allows the owner to select a padlock appropriate to their own security expectations.

A Sheltered Bay for Bicycles and Logs

The attached 2.9m² sheltered area is one of the most practical parts of this model. It can be used for bicycles, firewood or other items that benefit from cover but do not necessarily need to be enclosed behind doors.

As a bicycle area, the covered bay helps keep bikes separate from tools and garden equipment stored inside the shed. This can prevent clutter in the enclosed room and make daily access easier. A bike that is used frequently is often more convenient to store in a covered open bay than behind a full shed door, especially when space inside the shed is already allocated to tools or equipment.

As a logstore, the slatted design is particularly relevant. Logs need airflow to help them dry and stay usable. Fully enclosed storage can trap moisture around timber, while slatted sides allow air movement. The roof cover helps protect logs from direct rainfall, while the open structure supports ventilation.

The ability to position the sheltered section on either side of the shed is useful during garden planning. It allows the building to adapt to the layout of the plot, whether the open area is best placed near a path, beside a wall, next to a patio or facing a particular direction for easier access.

Assembly, Fixings and Warranty Conditions

The Palmako Leif is supplied with instructions and a fixings kit. These are intended to support a straightforward assembly process. As with all timber garden buildings, it is important to read the instructions before starting and to organise the components carefully.

Because the shed includes an enclosed section and an attached shelter, enough time should be allowed for careful construction. The base should be prepared in advance, and all parts should be checked before assembly begins. A level working area will make installation easier and help ensure that the doors fit and operate correctly.

The building comes with a 5-year manufacturer’s parts warranty. The warranty is linked to correct care, including timber treatment. Since the shed is delivered untreated, the owner must apply a high-quality anti-fungal treatment upon assembly and continue treating the timber annually. This protects against rot and supports the warranty.

This maintenance requirement should be considered part of normal ownership. Timber garden buildings are durable when properly cared for, but untreated timber exposed to weather is vulnerable. Treatment helps preserve the structure, while paint can be added later for appearance if desired.

Material Thickness and Everyday Use

When comparing garden buildings, wall thickness can make a noticeable difference. This model uses 16mm timber across the wall cladding, floor and roof boards. That gives a consistent construction standard throughout the main shed parts.

The 16mm wall thickness helps create a more substantial feel than thinner, lighter-duty cladding. The tongue and groove profile also supports the building’s weather resistance by helping boards interlock neatly. Combined with the 32mm frame, this gives the shed a structure suited to regular garden storage use.

The floor thickness is also relevant. Garden items are often heavy, awkward or dirty: bags of compost, tools, boxes, hoses, pots and outdoor accessories can all place pressure on the floor. The supplied 16mm tongue and groove floor, supported by foundation joists, gives the interior a practical base for storage.

The roof boards match the floor thickness, but they still require a roof covering. Buyers should therefore account for the covering option when planning the total installation. The roof structure and roof covering work together: the boards provide the timber surface, while the felt or SBS protects the roof from weather.

Planning the Position in the Garden

Before installing the shed, the chosen location should be assessed carefully. The building measures approximately 3.8m x 1.9m, so the footprint must allow not only for the structure itself but also for access around it. The double doors need space to open, and the sheltered bay should be reachable without obstruction.

The direction of the pent roof slope should also be considered when positioning the building. Rainwater will naturally run down the sloped roof, so it is sensible to think about where water will drain and whether it could affect paths, planting areas or neighbouring boundaries.

The base should be flat, stable and level. Although the foundation joists help keep the floor raised from ground moisture, they are not a substitute for proper site preparation. A poor base can create long-term problems, including uneven door gaps or stress on the timber structure.

It is also useful to think about future maintenance access. Since annual timber treatment is required, the shed should not be placed so tightly against obstacles that external walls become difficult to reach. Good access makes it easier to maintain the wood properly over the life of the building.

Care of Untreated Timber

This shed is delivered untreated. That means the timber has not already been coated with the protective anti-fungal treatment needed for outdoor exposure. Treatment should be applied promptly upon assembly and repeated annually.

A high-quality anti-fungal treatment helps protect the Nordic spruce from rot. Particular attention should be paid to exposed edges, lower wall areas, door edges and any locations where water may sit. The floor area is supported by foundation joists to reduce ground moisture exposure, but ongoing care remains necessary.

If the owner wants a coloured finish, paint may be applied to customise the building. The paint should be compatible with timber garden buildings and should not replace the need for proper protective treatment unless it is specifically suitable for that role. The supplied information makes clear that treatment is required to protect the wood and support the warranty.

Regular checks are also sensible after periods of bad weather. Any signs of wear to the roof covering, timber coating or door fittings should be addressed promptly. Timber buildings perform best when small maintenance tasks are handled before they become larger problems.

Practical Buying Considerations

This model is available in a choice of sizes, and delivery is free to most UK addresses. For buyers choosing between sizes, the key consideration is how the two-zone layout will be used. The enclosed 3m² shed is best reserved for items needing secure, hidden storage, while the 2.9m² shelter suits items that need cover and ventilation.

The supplied roof does not include a covering as standard, so a covering should be selected as an optional upgrade if needed. SBS provides a thick, long-life weatherproof covering but requires advanced DIY ability or professional installation because it is torch-applied. Roof underlay felt can be nailed on more easily, but it is described as temporary if used alone and is better considered as an underlay to SBS.

Security planning should also include the padlock, since this is not included. The hasp and staple provide the fitting, but the padlock must be purchased separately. Buyers should choose one suitable for outdoor use.

For anyone looking for a 13 x 6 wooden shed, a bike shelter shed or a Nordic spruce garden building, the Palmako Leif offers a clear specification: 16mm tongue and groove timber, a 32mm frame, a pent roof, double doors, a windowless secure area and an attached open storage section.

A Balanced Choice for Organised Outdoor Storage

The 13′ x 6′ Palmako Leif Heavy Duty Wooden Shed with Bike Shelter is suitable for gardens where storage needs are varied. It avoids the limitations of a single enclosed shed by adding a covered open bay, while still providing a secure, windowless room for valuable or weather-sensitive items.

Its main strengths lie in the combination of materials and layout. The 16mm Nordic spruce tongue and groove cladding gives the walls a substantial construction, while the matching floor and roof boards create a consistent timber structure. The 32mm frame adds support, and the foundation joists help protect the floor area from moisture by encouraging airflow underneath.

The pent roof gives the building a modern shape, although the required roof covering must be planned separately. The choice between SBS and roof underlay felt should be made according to intended longevity, installation skill and budget. SBS is the more durable described covering, while underlay felt is a temporary covering or underlay option.

The enclosed shed, double doors, hasp and staple, and windowless design make the 3m² section useful for secure storage. The 2.9m² sheltered space adds flexibility for bicycles, logs or other covered storage. Since it can be positioned on either side, the layout can be adapted to suit different garden arrangements.

For a garden house shop customer, the purchase is justified when the requirement is not only for storage volume but for organised, separated storage. This shed offers a defined place for tools and equipment, alongside a covered area for bikes or logs, using a timber specification that is clearly stated and suited to regular outdoor use. With correct assembly, an appropriate roof covering and annual anti-fungal treatment, it provides a practical and structured storage solution for UK gardens.