Shire Maulden 2.7m x 3.5m Log Cabin Summer House (19mm)

Description

Shire Maulden 2.7m x 3.5m Log Cabin Summer House: 19mm pine logs, 850mm verandah, tongue-and-groove roof and floor, felt and fixings included.

A Pine Garden Cabin with a Sheltered Front Space

The Shire Maulden 2.7m x 3.5m Log Cabin Summer House is a timber garden building from the Shedstore Super Deal Log Cabin range. It is designed as a compact garden log cabin with a defined front elevation, an integral verandah and a true-log construction supplied in loose component form rather than as sectional wall panels.

This model is produced from untreated high-grade pine and uses 19mm planed logs for the walls. The product size includes an 850mm deep verandah, giving the building a covered outdoor area at the entrance. For gardens where a small seating point or a sheltered threshold is useful, this detail is important because the verandah is not an extra add-on; it is part of the stated overall footprint.

The cabin combines a part-glazed single door, a Georgian-style opening front window, 3mm horticultural glass, a 12mm tongue-and-groove roof and a 12mm tongue-and-groove floor. Roofing felt, fixings and instructions are included. The floor is also included in the price, which is worth noting when comparing this type of wooden summer house with other timber garden buildings.

19mm Planed Logs in High-Grade Pine

The wall construction is one of the central points of the Shire Maulden Log Cabin. The walls are formed from 19mm planed logs, made from untreated high-grade pine. At 19mm, the log thickness is more than one-and-a-half times the cladding thickness of a conventional 12mm wooden summerhouse. This gives the building a more substantial wall profile than a standard thin-clad summer house.

The use of true-log components also affects the way the building is assembled. It is supplied palletised in loose component true-log form, not as pre-made sectional panels. This means the walls are built up from individual log components during assembly. The method is typical of many log cabins and creates the characteristic horizontal timber profile associated with a 19mm log cabin.

Because the timber is supplied untreated, it must be preserved after installation. The manufacturer states that the customer should apply a good-quality preservative to the external timber surfaces immediately after the building has been installed. This is not a minor detail: untreated timber should not be left exposed to weather without suitable protection. The chosen preservative should be suitable for exterior timber and applied according to its instructions.

The 850mm Verandah as Part of the Footprint

A key feature of the Maulden model is the integral 850mm deep verandah. This verandah is included within the product size rather than being separate from it. When measuring the available space in the garden, the full 2.7m x 3.5m product size should therefore be considered as including the verandah area.

The verandah creates a sheltered front zone that can be used as a transition between the garden and the enclosed cabin. It may be used as a place to pause before entering, to keep the doorway more sheltered, or to position small outdoor items while the building is in use. As it is integral to the design, it also contributes to the appearance of the cabin, giving the front elevation more depth than a flat-fronted structure.

For planning purposes, the verandah should be treated as part of the building’s footprint. The base must support the cabin properly, and the structure requires a flat, level and square concrete or paved base for assembly. The verandah should therefore not be left unsupported or placed over uneven ground.

Tongue-and-Groove Roof and Floor Construction

The roof of the Maulden cabin is made from 12mm tongue-and-groove boarding. Tongue-and-groove construction helps create a neatly interlocked timber surface, which is commonly used in garden buildings where a stronger and more stable board arrangement is required than simple overlapping boarding. The roof is supplied with roofing felt as standard.

The floor is also made from 12mm tongue-and-groove boarding and is included in the price. This is a practical point when comparing garden cabins, as not every timber building includes a floor as standard. A supplied floor helps create a complete enclosed interior once the building has been assembled on the correct base.

The floor supports, or joists, are manufactured from pressure-treated timber. This is relevant because the floor area is one of the most vulnerable parts of any timber garden building. It sits closest to the base and is more likely to be affected by ground-level moisture if the building is not installed correctly or if water cannot drain away properly. Pressure-treated joists are intended to support a longer service life in this vulnerable area.

Door, Window and Glazing Details

The front of the cabin includes a part-glazed single door. The door is supplied with a quality key lock, giving the building a lockable entrance. As with any garden building, the level of security should be considered in relation to what will be stored inside, but the presence of a key lock is a useful standard feature.

The single opening window is positioned to the front and has a Georgian design. The opening function allows ventilation when the cabin is being used, while the front placement contributes to the building’s traditional summer house appearance. The glazing used is 3mm horticultural glass.

Horticultural glass is commonly used in garden structures and provides clear glazing for natural light. It should be handled carefully during installation and use, as with any glass component. The combination of a glazed door and front window allows light to enter from the front elevation, helping the interior feel more usable during daylight hours.

Internal Eaves Height and Practical Proportions

The Maulden model has a generous internal eaves height of 1.80m, equivalent to approximately 5’11”. Eaves height refers to the internal height near the side wall before the roof rises. This measurement is useful because it affects how the internal space feels and how easily the building can be used around the walls.

For a garden summer house, internal height is an important specification. A higher eaves measurement can make the building feel less confined, especially when used for sitting, hobbies or general garden leisure. The stated 1.80m internal eaves height gives a clear reference point for customers comparing this cabin with lower timber buildings.

The overall product size of 2.7m x 3.5m includes the verandah, so the enclosed internal area will be smaller than the full footprint. This should be taken into account when planning furniture, storage items or intended use. The cabin should be selected with both the enclosed space and the verandah space in mind.

Preparing the Base Before Assembly

This log cabin requires a flat, level and square concrete or paved base. Correct base preparation is essential for assembly and for the long-term performance of the structure. A base that is uneven, out of square or unstable can make installation more difficult and may affect the alignment of the logs, door and window.

Concrete and paving are both suitable base types according to the product description, provided they are flat, level and square. The base should be ready before delivery and assembly. Because the building is delivered in loose component true-log form, the assembly process depends on each component fitting correctly with the next. A level base supports this process.

It is also sensible to consider the surrounding ground. Water should not be encouraged to collect around the timber building. While the floor joists are pressure treated, the building still requires sensible placement and proper timber treatment. The base should provide stable support for the cabin footprint, including the integral verandah.

Delivery Format and Site Access

The Maulden cabin is delivered palletised in loose component true-log form. It is not delivered as large pre-assembled wall sections. This delivery format should be considered when planning access, unloading and assembly. The product is delivered to the front driveway only.

Front driveway delivery means the customer should plan how the components will be moved from the delivery point to the assembly site. The route from the driveway to the garden should be considered in advance, particularly where there are narrow paths, steps, gates or changes in level. The product information does not state that the delivery will be taken to the final installation position.

Because the cabin is supplied with fixings and instructions, the necessary assembly guidance is included. The components should be checked and organised before installation begins. Since the structure is made from individual log elements, careful following of the instructions is important for correct alignment and stable construction.

Timber Treatment After Installation

The cabin is supplied untreated. This means treatment is not optional if the building is to be exposed to normal outdoor conditions. The external timber surfaces must be treated immediately after installation with a good-quality preservative. This requirement applies to the untreated pine logs and other exposed external timber surfaces.

Treatment helps protect timber from weathering and moisture. The specific product used should be suitable for outdoor timber buildings and should be applied in line with the preservative manufacturer’s instructions. Particular attention should be given to exposed end grain, joints and areas where water may settle.

Ongoing care should also be considered. Timber buildings are natural products and may require re-treatment over time, depending on the preservative used and local weather exposure. Checking the roof felt, maintaining the finish and ensuring water does not stand around the base are all sensible care practices for a timber garden building.

Included Components in Clear Terms

• 19mm high-grade planed logs for the cabin walls.
• An integral 850mm deep verandah, included in the stated product size.
• 12mm tongue-and-groove roof boarding.
• 12mm tongue-and-groove floor boarding, included in the price.
• Pressure-treated timber floor supports.
• Roofing felt supplied as standard.
• Fixings and instructions included.
• A part-glazed single door with a quality key lock.
• A front opening window with Georgian design.
• 3mm horticultural glass glazing.

These included items define the specification clearly. The cabin is not simply a shell without floor or roofing felt. The supplied components allow the building to be assembled as a complete garden cabin, provided the correct base is prepared and the timber is treated after installation.

A Practical Case for Choosing the Maulden

The purchase is worthwhile for customers who want a compact log cabin summer house with a traditional timber appearance, a sheltered front verandah and a more substantial wall construction than a conventional 12mm clad summerhouse. The 19mm log walls, tongue-and-groove roof, included tongue-and-groove floor and pressure-treated floor joists create a specification that is easy to compare against simpler garden buildings.

The integral verandah is another practical reason to consider this model. It gives the building a defined entrance area without requiring a separately purchased porch. Since the verandah is included in the product size, it should be evaluated as part of the overall design rather than as a detached feature.

The inclusion of roofing felt, fixings and instructions also simplifies the specification. Customers still need to prepare a suitable base and apply timber treatment, but the core building components described above are supplied. For a garden house shop, this makes the product straightforward to present: it is a 2.7m x 3.5m untreated pine log cabin with 19mm walls, a verandah, a lockable glazed door and a front opening window.

Points to Check Before Ordering

Before selecting the Shire Maulden, the available garden space should be measured carefully. The 2.7m x 3.5m size includes the 850mm verandah, so the full footprint must be allowed for. The base must be flat, level and square, and it should be made from concrete or paving.

Access should also be reviewed. Delivery is to the front driveway only, and the cabin is supplied palletised in loose component form. A clear route from the driveway to the installation site should be planned before delivery day. If the garden is difficult to access, this should be considered in advance.

Finally, the need for immediate treatment should be included in the project plan. The cabin is supplied untreated, so a good-quality exterior timber preservative must be available for use once installation is complete. This is part of owning and maintaining the building, not an optional finishing touch.

A Measured Timber Building for Garden Use

The Shire Maulden 2.7m x 3.5m Log Cabin Summer House is best understood as a value-focused timber garden cabin with a defined specification: untreated high-grade pine, 19mm planed log walls, an integral 850mm verandah, a 12mm tongue-and-groove roof and floor, pressure-treated floor joists, felt, fixings, instructions, a lockable part-glazed door and a Georgian-style opening front window.

Its strengths lie in the combination of log construction, included floor, sheltered entrance area and clear assembly requirements. It is suitable for customers who are prepared to provide the correct base and apply preservative immediately after installation. With those requirements understood, it offers a structured and practical option for adding a timber summer house feature to a garden.